Download Print this page

Black & Decker 11BLE-325 Instruction Manual page 9

Advertisement

Available languages

Available languages

1.
2.
3.
4.
Locate and remove all loose parts
from the carton.
With handle oriented
as shown,
align grooves in carry handle (P)
with rails on top of pressure washer
and slide into place.
Push as shown to further lock carry
handle into place.
Remove and discard the shipping
plug (L) from the outlet (K) on the
front of the machine.
@
PRESSURE
WASHER
TERMINOLOGY
PSi:
Pounds
per Square
Inch. The
unit of measure
for water
pressure.
Also used for air pressure, hydraulic
pressure, etc.
GPM: Gallons Per Minute. The unit of
measure for the flow rate of water.
CU: Cleaning Units. GPM multiplied by
PSI. GPM x PSi = CU
Detergent
Injection
System:
Mixes
cleaners or cleaning solvents with the
water to improve cleaning effectiveness.
Water
Supply:
All pressure washers
must
have a source
of water. The
minimum
requirements
for
a water
supply are 20 psi and 5 gallons per
minute. If your water source is a well,
the garden hose length can only be 30
ft. (9 m) max.
Z_
WARNING:
To
reduce
the
possibility
of contamination
always
protect
against
backflow
when
connected
to a potable water system.
DANGER: Risk of fluid injection
and laceration. When using the high=
pressure
setting,
DO
NOT
allow
the high-pressure
spray
to come in
contact
with unprotected
skin, eyes,
or with any pets or animals.
Serious
injury will occur.
Your
washer
operates
at fluid
pressures
and
velocities
high
enough to penetrate
human and
animal flesh, which could result in
amputation
or other serious injury.
Leaks caused by loose fittings or
worn or damaged hoses can result
in injection injuries. DO NOT TREAT
FLUID INJECTION AS A SIMPLE
CUT! See a physician immediately!
9- ENG

Advertisement

loading