Electrical; 110V Operation; Extension Cords - Woodstock SHOP FOX W1814 Owner's Manual

The Model W1814 is wired for 110V operation. We
recommend connecting this machine to a dedicated
circuit with a verified ground, using the circuit size below
as a minimum. Never replace a circuit breaker with one of
higher amperage without consulting a qualified electrician
to ensure compliance with wiring codes.
This machine must be grounded! The electrical cord
supplied with this machine comes with a grounding pin. If
your outlet does not accommodate a ground pin, have it
replaced by a qualified electrician.
We do not recommend using an extension cord; however,
if you have no alternative, use the following guidelines:
• Use a cord rated for Standard Service (S).
• Do not use an extension cord longer than 50 feet.
• Ensure that the cord has a ground wire and pin.
• Use the gauge size listed below as a minimum.

110V Operation

12 Amps 15 Amps
8 5-15 plug and receptacle.
NEMA 5-15
-9-
14 Gauge