Connecting The Fm And Am Antennas - JVC RX-5022VSL Instructions Manual

Audio/video control receiver
Hide thumbs Also See for RX-5022VSL:
Table of Contents

Advertisement

Getting
Started
AM Loop Antenna
(supplied)
Outdoor FM antenna (not supplied)
If FM reception is poor, connect outdoor FM antenna.
or
Supplied FM
antenna
Standard type
outdoor FM antenn_
(not supplied)
Y
FM antenna (supplied)
Extend the supplied FM antenna horizontally.
If AM reception is poor, connect outdoor
single vinyl-covered
wire (not supplied).
AM antenna
connection
Connect
the AM loop antenna
supplied
to the AM LOOP
terminals.
Turn the loop until you have the best reception.
• If the reception
is poor, connect
an outdoor
single vinyl-
covered
wire (not supplied)
to the AM EXT terminal.
(Keep the
AM loop antenna
connected.)
FM antenna
connection
Connect
the supplied
FM antenna
to the FM 75 f_ COAXIAL
terminal
as temporary
measure.
Extend
the supplied
FM antenna
horizontally.
• If the reception
is poor, connect
an outdoor
FM antenna
(not
supplied).
Before
attaching
a 75 f_ coaxial
cable (with a
standard
type connector),
disconnect
the supplied
FM antenna.
Notes:
• If the AM loop antenna wire is covered with vinyl,
A_ J
remove the vinyl while twisting it as shown to the
right.
• Make sure the antenna conductors do not touch any
other terminals, connecting cords and power cord.
This could cause poor reception.
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-5020vbk

Table of Contents