To Erase A Stored Preset Station; To Tune In A Preset Station; Selecting The Fm Reception Mode - JVC RX-5022VSL Instructions Manual

4 Press MEMORY again while the ......
selected channel number is flashing _x-_
on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.
i 8 'I 5 "" H 7 2 5
. I I __
5 Repeat steps I to 4 until you store all the stations
you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored
one.
When an FM stereo broadcast is hard to receive or noisy, you can
change the FM reception mode while receiving an FM broadcast.
° You can store the FM reception mode for each preset station (see
page 16).
I While listening to an FM station, press FM
MODE.
• Each time you press the button, the FM reception mode
alternates between "AUTO" and "MONO."
FM MODE FM MODE
On the front panel From the remote control
/
S
O
gll
o
=1
To tune in a preset station
On the front
panel:
Press FM/AM to select the band
(FM or AM).
The last received station of the selected band
is tuned in.
• Each time you press the button, the band
alternates between FM and AM.
FM/AM
B-15 ""H 7
• II 2__
ANALOG r_ K [] "F'JNEO S3_:EO /_]IOMUTa_
BUTO
i,,i n i, in
@ @UIqU
2 Press FM/AM PRESET UP/DOWN
...........
until you find the channel you want. °P_
I
• Pressing FM/AM PRESET UP increases
DOWN
the channel numbers.
° Pressing FM/AM PRESET DOWN
decreases the channel numbers.
From the remote control:
Press FM/AM to select the band (FM or FM/_M
AM).
The last received station of the selected band is
tuned in and thel0 keys now work for tuner operation.
• Each time you press the button, the band
alternates between FM and AM.
2
Press 10 keys to select a preset
channel number. <@ .........
• For channel number 5, press 5.
• For channel number 15, press +10 then 5. @ @v @
_For channel number 20, press +10 then 10. ........
For channel number 30, press +10, +10, @ _;:_@
then 10.
-%/
MONO
: Select this to improve the reception (but stereo
effect will be lost).
In this mode, you will hear noise while tuning into
the stations. The AUTO MUTING indicator goes
off from the display. (The STEREO indicator also
goes off.)
To restore the stereo effect
Select "AUTO" in step I.
17