To Change The Transmittable Signals For Operating A Vcr; To Change The Transmittable Signals For Operating A Dvd Player - JVC RX-5022VSL Instructions Manual

To change the transmittable signals for
operating a VCR
I Press and hold STANDBY/ON O/I VCR.
2 Press VCR.
;3 Enter manufacturer's code using buttons 1-9,
and 0.
4 Release STANDBY/ON O/I VCR.
Now, you can perform the following operations on the VCR.
VCN OH +1- : Change the channels.
After pressing VCR (source selecting button), you can use the
following buttons on the VCR:
FF : Fast-wind a tape.
• : Stop playback or recording.
REC PAUSE : Press this button to enter recording
pause.
Press this button then • to start
recording.
To change the transmittable signals for
operating a DVD player
I Press and hold STANDBY/ON ©/I DVD.
2 Press DVD.
;3 Enter manufacturer's code using buttons 1-9,
and 0.
4 Release STANDBY/ON O/I DVD.
Now, you can use the following buttons on the DVD player.
After pressing DVD (source selecting button), you can use the
following buttons on the DVD player:
• : Stop playback.
144 : Return to the beginning of the current
(or previous) track.
/
0
mo
0
3=
gl
€
mo
L
o
m
mo
"13
[t
5
Note:
Refer also to the manual supplied with your VCR.
Try to operate your VCR by pressing
STANDBY/ON O/I VCR.
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
5
DVD menu operations
After pressing DVD (source
selecting button), you can use the
following buttons for DVD menu
operations:
,
@A
@,
;_ ,:x? +
A/V/•/41 : Select an item on the menu screen.
Try to operate your DVD player by pressing
STANDBY/ON O/I DVD.
When your DVD player turns on or off, you have entered the
correct code.
Manufacturers' codes for VCR
Manufacturer Codes
JVC 01", 02, 03
Emerson 10, 22
Gold Star 11
Hitachi 04
Mitsubishi 12
NEC 21
Panasonic 07, 13
Philips 09
RCA 05, 06
Samsung 20
Sanyo 17, 18, 19
Sony 14, 15, 16
Zenith 08
*Initial setting
Manufacturers' codes for DVD player
Manufacturer
JVC
Panasonic
Philips
Pioneer
Sony
Toshiba
Yamaha
Codes
01"
O2
O4
0a
o5
o6
o7
* Initial setting
Manufacturers' codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
29