Table of Contents
Advertisement
CD changer
After pressing CD-DISC, you can use the following buttons for CD
changer operations:
Cassette deck
After pressing TAPE/CDR, you can use the following buttons for
cassette deck operations:
I-4-4
: Return
to the beginning
of the current
(or previous)
track.
•
: Stop playback.
1 - 6, 7/P
: Select the number of a disc installed in a CD
changer.
If your CD changer is of 200-disc loading capability (except for
XL-MC100 and XL-MC301),
you can do the following operations using the number buttons after
pressing CD:
I
Select a disc number.
2
Then select a track number (always enter two digits).
3
Start playback.
Examples:
• Selecting
disc number
3, track number
2, and start playback.
Press 3, then, 0, 2, then _.
• Selecting
disc number
10, track number
5, and start playback.
Press 1, 0, then, 0, 5, then I_.
• Selecting
disc number
105, track number
12, and start playback.
Press 1, 0, 5, then 1, 2, then _.
FF
: Fast wind the tape from left to right.
•
: Stop playback
or recording.
REC PAUSE
: Press
this button
to enter recording
pause.
Press this button
then I_ to start recording.
Note:
Before starting the above operations,
make sure that you have
changed the source name correctly. See page 8.
CD recorder
After pressing TAPE/CDR, you can use the following buttons for
CD recorder operations:
I-4-4
: Return
to the beginning
of the current
(or previous)
track.
•
: Stop playback
or recording.
REC
PAUSE
: Press
this button
to enter recording
pause.
Press
this button
then _
to start recording.
Note:
Before starting the above operations,
make sure that you have
changed the source name correctly. See page 8.
26
Hide quick links:
Advertisement
Table of Contents
