Windster RA-3030 Operation Manual page 11

I. Mounting Range Hood Without Cabinet
Note: Please also refer P.10 "J. Making the Electrical Connection'
1. Using metal brackets and screws
(included), center hood onto
board and install screw.
2. Remove the hood from the board and
nail the wood board onto the wall.
(Be sure the nail is in the center of
the stud)
3. Place the range hood on the board
and tighten the screw.
-10-
4. Complete finished
5. Duct cover (Optional)
(refer P.15 and P.17)