Windsor MPRO 10080390 Operating Instructions Manual page 18

MAINTENANCE
TROUBLESHOOTING CHART
Worn brush bearings
Carpet not getting clean Severe soil conditions
Carpet too wet
Carpet not getting wet
4-6
Squealing or grinding sound in brush
housing.
Worn spray jet
Solution filter screen clogged.
Spray jet clogged.
Pump not running.
Faulty solution switch.
86037780 EXTRACTOR 12/09/06
Replace bearings.
Make several passes at right angles to
each other.
Use a pre-spray.
Replace spray jet which is producing a
fine mist.
Clean solution filter screen located
inside lower tank.
Clean or replace jet. Do not use a wire
to clean jet. Damaged jet will cause
over-saturation.
Check for and correct any loose wires.
Repair or replace.
Replace switch in handle.