Printing The Network Configuration Report; Printing The Wlan Report (For Dcp-9020Cdw, Mfc-9130Cw, Mfc-9330Cdw And Mfc-9340Cdw) - Brother MFC-9130CW Network User's Manual

Control panel setup

Printing the Network Configuration Report

NOTE
Node name: The Node name appears on the Network Configuration Report. The default node name is
"BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network. ("xxxxxxxxxxxx" is
your machine's MAC Address / Ethernet Address.)
The Network Configuration Report prints a report listing all the current network configuration including the
network print server settings.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to display Print Reports.
Press Print Reports.
d
Press Network Configuration.
e
Press OK.
NOTE
If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try again.
Printing the WLAN report
(For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and
MFC-9340CDW)
The WLAN Report prints your machine's wireless status report. If the wireless connection failed, check the
error code on the printed report. See Quick Setup Guide: Troubleshooting.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to display Print Reports.
Press Print Reports.
d
Swipe up or down, or press a or b to display WLAN Report.
Press WLAN Report.
e
Press OK.
4
4
4
48