Camera; Third-Party Applications - palmOne Treo Instructions Manual

Hide thumbs Also See for Treo:
Table of Contents

Advertisement

Camera

The Camera application takes pictures at Small picture size (160x120 pixels)
and Large picture size (640x480 pixels, or .3 megapixel). Here are some tips
for taking good pictures with the built-in camera:
• Clean the camera's lens with a soft, lint-free cloth.
• Take pictures in bright lighting conditions. Low-light images may be
grainy, due to the sensitivity of the camera.
• Hold the camera as still as possible. You may want to support your picture-
taking arm up against your body or a stationary object (such as a wall).
• Keep the subject of the pictures still. Exposure time is longer with lower
light levels, so you may see a blur.
• For best results, verify that you have the brightest light source coming
from behind you, lighting the subject's face. Don't take indoor pictures
with the subject in front of a window or light.
• Make sure the subject is at least 18 inches away from the camera to
ensure good focus.
Remember, when you synchronize, your Camera images are stored in the
Treo Pictures folder on your hard drive (see page 62).
The Camera preview image looks strange
Some third-party applications overwrite the Treo's color settings with their
own 8-bit color settings. This can affect the Camera preview mode. Delete
third-party applications one by one until the preview image improves.
When using the camera in low light, you may see blue specks on the
screen. Once you capture the image, the quality improves, and many of the
blue specks disappear.
144 :: Camera

Third-party applications

Sometimes, third-party applications can cause conflicts on your Treo.
Third-party applications that modify wireless features may require extra
troubleshooting.
If you recently installed an application and your Treo seems to be stuck ,
try the following:
1. Perform a soft reset (see page 131).
2. If the problem persists, perform a system reset (see page 131).
3. Delete the most recently installed application from your Treo (see page 103).
4. If the problem persists, perform another system reset.
5. Delete other third-party applications one at a time until you eliminate
the problem.
6. If none of the steps above are possible, you may wish to perform a
hard reset (see page 132). Then, locate your Backup folder on your
computer (Windows: C:\Program Files\palmOne\user name; Macintosh:
Mac HD\Applications\palmOne\Users\user name). If you find a .prc or
.pdb file for any applications you just removed, delete the file(s) from
the Backup folder. Then, perform a HotSync operation to restore your
data and applications.
Remember, not all third-party applications were written with the Treo keyboard
and 5-way navigation in mind. You may encounter strange behavior or errors
in these applications if you use the keyboard and navigation control.
Getting more help
Contact the author or vendor of any third-party software if you require
further assistance.
Third-party applications :: 145

Advertisement

Table of Contents
loading

Table of Contents