Screen - palmOne Treo Instructions Manual

Hard reset
A hard reset erases all data and third-party software on your Treo. Never
perform a hard reset without first trying a soft and system reset. You can
restore previously synchronized data with the next HotSync operation.
A hard reset can tell you whether a problem stems from your Treo or an
application installed on it. If you do not experience the problem after you
perform a hard reset, the problem may be related to software you installed.
See page 145 for suggestions on diagnosing third-party software issues.
1. Unscrew the stylus tip to access the reset tool.
2. While holding the Wireless Mode button
press the reset button on the back of your Treo.
3. When the Palm Powered logo appears, release the Wireless Mode
button .
4. When the warning appears, press Up
5. If a language selection screen appears, select the same language you
selected for your desktop software.
132 :: Resetting your Treo
, use the reset tool to gently
to confirm the hard reset.

Screen

The screen appears blank
1. Look closely at the screen. If you can see a dim image, try adjusting the
screen contrast and brightness (see page 114).
2. If that doesn't work, perform a soft reset (see page 131).
3. If that doesn't work, connect the Treo to the AC charger (see page 12)
and perform a soft reset again.
4. If that doesn't work, perform a hard reset (see page 132).
The screen doesn't respond accurately to taps or activates
wrong features
1. Press Applications Launcher .
2. Choose the pick list in the upper-right corner, then select All.
3. Choose the Prefs icon.
4. Choose the pick list in the upper-right corner, then select Display.
5. Choose Touchscreen.
6. Follow the onscreen instructions to recalibrate the touchscreen.
Screen :: 133