Table of Contents
Advertisement
Fade
When you start recording,
the image/audio
gradually
appears.
(Fade in)
When you pause
recording,
the image/audio
gradually
disappears.
(Fade out)
• The Fade setting
is canceled
when the recording
stops.
(Fade in)
•
To select
the
color
for
Fade in/out
: [RECORD
SETUP]
_
[FADE
COLOR]
[WHITE]
or [BLACK]
(Fade out)
• The thumbnails
of scenes
recorded
using fade in become
black (or white).
This brightens parts that are in shadow and difficult to see and suppresses
white saturation in
bright parts at the same time. Both bright and dark parts can be recorded clearly.
• If there are extremely
dark or bright parts or the brightness
is insufficient,
the effect may not
be clear.
This allows
recording
of the pictures
and sound
to start approximately
3 seconds
before
the recording
start/stop
button
is pressed.
•
PRE:RECiappears
on the screen.
• Aim the unit
at the subject
beforehand.
• There
is no beep sound.
• PRE-REC
is canceled
in the following
cases.
If you change
the mode
If you remove
the SD card
If you touch [MENU]
or [Q.MENU]
If you press
1080/60p
button
If you turn the unit off
If you start recording
After 3 hours have passed
• After setting
PRE-REC,
if recording
starts in less than 3 seconds,
or while the PRE-REC
indication
flashes within about 3 seconds
after initiating
the Quick start operation,
motion
pictures
taken 3 seconds
before pressing
the recording
start/stop
button cannot be recorded.
• images
displayed
on the thumbnail
in Playback
Mode will differ from the motion
pictures
displayed
at the start of playback.
56
VQT3K35
Advertisement
Table of Contents
