Table of Contents
Advertisement
Manual shutter speed/iris
adjustment
_0
Shutter
Speed:
Adjust
it when recording
fast-moving
subjects.
Iris:
Adjust
it when the screen
is too bright or too dark.
• Press the iA/MANUAL
button
to switch
to Manual
Mode.
(-) 75)
1 Touch [SHTR] or [IRIS].
2
Touch _/[_
to adjust settings.
• Touch
[SHTR]/[IRIS]
to complete
the adjustments.
Shutter
speed:
1/60 to 118000
• If [AUTO SLOW
SHTR
(2D)] is set to [ON], the shutter
speed will be set between
1/30 and
1/8000.
• If [DIGITAL
CINEMA]
is set to [ON], the shutter
speed will be set between
1/48 and 1/8000.
(When
[AUTO SLOW
SHTR
(2D)] is set to [ON], the range is 1/24 to 1/8000.)
• The shutter
speed
closer to 1/8000 is faster.
• The shutter
speed will be set between
1/2 and 1/2000 in Still Picture
Recording
Mode.
_'lris/Gain
value:
CLOSE
_
(F16 to F1.7) _ OPEN
_
(OdB to 18dB)
• Value closer to CLOSE
darkens
the image.
• Value closer to 18dB brightens
the image.
• When
the iris value is adjusted
to brighter
than OPEN,
it changes
to the gain value.
• To return
to auto setting,
press the iA/MANUAL
button
again.
• When
setting
both the shutter
speed and the iris/gain
value,
set the shutter speed
and then
set the irislgain
value.
Manual
shutter
speed
adjustment
• When
the shutter
speed
is set lower than
1/15 in the Still Picture
Recording
Mode,
using a
tripod is recommended.
Also, white balance
cannot
be set. The shutter speed will be set to
1/30 when the unit is turned on again or when the Quick start is performed.
• You may see a band of light around
an object that is shining very bright, or highly reflective.
• During
normal playback,
image
movement
may not look smooth.
• If you record an extremely
bright object or record under
indoor lighting,
color and screen
brightness
may change
or a horizontal
line may appear
on the screen.
In this case, record
in the intelligent
Auto Mode or set the shutter speed
to 1/60 in areas where
the power
supply
frequency
is 60 Hz, or 1/100 in areas of 50 Hz.
Manual
iris/gain
adjustment
• Luminance
level and histogram
are displayed
during the iris adjustment.
(-) 70)
• If the gain value is increased,
the noise on the screen
increases.
• Depending
on the zoom
magnification,
there are iris values
that are not displayed.
77
VQT3K35
Advertisement
Table of Contents
