Table of Contents
Advertisement
The u sed space and r emaining
recordable
time o fthe SD card c an be checked.
• When
the mode switch
is set to i_,
remaining
recordable
time for the selected
recording
mode is displayed.
• Touch
[EXIT] to close the indication.
• The SD card requires
some space to store information
and manage
system
files, so the
actual usable
space is slightly
less than the indicated
value. The usable
space is generally
calculated
as 1 GB=1,000,000,000
bytes. The capacities
of this unit, PCs and software
are
expressed
as 1 GB=1,024x
1,024x
1,024=1,073,741,824
bytes. Therefore,
the indicated
value of the capacity
appears
to be smaller.
Perform the touch screen calibration if a different object to the one touched is selected.
1
Touch [CALIBRATION].
• Touch [ENTER].
2
Touch the [+] that appears
on the screen with the supplied
stylus
pen.
• Touch [÷] in sequence (up left _ down left _ down right _ up right _ center).
3
Touch [ENTER].
This item is used to start the unit demonstration.
(Only when the mode is at the
_
or
O
position)
If [DEMO
MODE]
is switched
to [ON] and you touch
[EXIT] when there is no SD card inserted
and while
this unit is connected
to the AC adaptor,
the demonstration
automatically
starts.
If any operation
takes place, the demonstration
is canceled.
However
if no operations
take
place for approx.
10 minutes,
the demonstration
automatically
starts again. To stop the
demonstration,
set [DEMO
MODE]
to [OFF] or insert an SD card.
This item is used to start the Optical
Image Stabilizer
demo.
(Only when the mode is at the
_
position)
Touch [O.I.S.
DEMO],
the demonstration
automatically
starts.
When
you touch [EXIT],
the demonstration
will be canceled.
You can select the language
on the screen
display
and the menu screen.
46
VQT3K35
Advertisement
Table of Contents
