Playing Back Recordings; (Basic Playback, Visual Search, Still Picture, Tracking, Tv/Vcr Playback) - Panasonic Plamcorder PalmSight PV-L671 Operating Instructions Manual

Playing Back Recordings
Before you begin...
¢ Connect Camcorder to power source.
* Insert recorded tape.
Auto Tracking
Continuously analyzes each recording for
optimum picture quality.
Manual Tracking
Some recordings require manual
adjustment to reduce noise.
Press UP A or DOWN Y until Playback
picture clears up.
Press DISPLAY to return to Auto Tracking.
Playback on EVF or LCD Monitor
1 Press LCD-OPEN and swing LCD
monitor fully open.
* |f you want to playback on EVF, close
and lock LCD monitor.
Set POWER to VCR.
Power Lamp lights.
* |f tape has no record tab, auto
playback begins.
* EVF or LCD monitor turns on/off by
the POWER switch.
* EVF shuts off when LCD monitor is
opened and turns back on when LCD
is closed.
Playback function buttons.
NREW _ : Rewind tape.
PLAY : Play tape.
STOP _ : Stop tape.
BRIGHT : Adjust LCD monitor brightness.
VOLUME: Adjust volume of speaker.
Press 'T': Volume
up (+).
Press "W": Volume
down (-).
Note:
* Using LCD monitor reduces battery
operating time. Return LCD monitor to
locked position when not in use.
Special Effects
Quick Visual Search
Search Speed
+ SP (Standard Play) :3 times normal.
* SLP (Super Long Play) : 9 times normal.
During playback, press:
*FF : fast forward search
* REW : rewind search
Press again or press PLAY for normal play.
Press STILL to freeze picture.
Press again for normal play.
This feature works best in SLP mode (page 11).
Note:
* During search, horizontal noise bars will appear.
Audio is muted.
* To protect video heads and tape, operating
modes wilt revert as follows after 5 minutes:
Still ———> Stand-by
Stand-by + ibi off (when Battery Pack is
used).
* Tape auto-rewinds if played or fast forwarded to end.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts @ panasonic.com