Panasonic HDC-SD800P Owner's Manual page 21

Charging and recording time
• Charging/Recording time
• Temperature: 25 °C (77 °F)/humidity: 60%RH
Supplied battery/
VW-VBN 130 (optional)
[7.2 V/1250 mAh]
VW-VBN260 (optional)
[7:2 v/2500 mAh]
2 h 30 min
4 h 30 min
[1080/60p]
[HA]
[HG], [HX],
[HE]
[iFrame]
[1080/60p]
[HA]
[HG], [HX],
[HE]
[iFrame]
1 h 35 min
1 h 40 min
1 h 45 min
1 h 50 min
3 h 5 min
3 h 20 min
3 h 30 min
lh
1 h5min
1 h 55 min
2h
2h5min
2 h 10 min
• These times are approximations.
• The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as
high/low temperature.
• Recordable time of 3D recording mode is the same.
(During 3D recording mode, 1080/60p and iFrame recording mode cannot be used.)
• The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
• The batteries heat up after use or charging. This is not a malfunction.
Battery capacity indication
• The display changes as the battery capacity reduces.
If there is less than 3 minutes remaining, then Q will become red. If the battery
discharges, then _ will flash.
• The remaining battery capacity is displayed when using the Panasonic battery that you
can use for this unit. The actual time can vary depending on your actual use.
• When using the AC adaptor or batteries made by other companies, the remaining
battery capacity will not be shown.
21
VQT3K35