Draining The Old Ink - Epson STYLUS 4800 Printer Manual

114 | Maintaining and Transporting the Printer
Note: If REPLACE
CNVRSION CRTG
appears, press the Pause
button. Remove the old
conversion cartridge(s)
from the left ink
compartment, and then
insert the new
conversion cartridge(s).
Go to step 4 to start
again.
If appears on the LCD, you need to replace the
MNT TNK FULL
maintenance tank. See page 121.

Draining the Old Ink

1. Make sure that
READY
2. Press the
Menu
3. Press the button until you see
button.
Menu
4. Press the button until you see
button.
Menu
5. Press the
Menu
6. When
RAISE THE RIGHT INK LEVER
ink lever on the right ink compartment.
7. When
RAISE THE LEFT INK LEVER
lever on the left ink compartment.
8. When
REMOVE INK CRTG
from the left ink compartment.
9. When
INSTALL CNVRSION CRTG
conversion cartridges in the slots on the left ink compartment.
10. When
LOWER THE LEFT INK LEVER
ink lever on the left ink compartment.
The printer starts draining ink and
LCD. Wait until draining is complete.
5-114
appears on the LCD panel.
button.
MAINTENANCE
BK INK CHANGE
button again.
appears on the LCD, raise the
appears on the LCD, raise the ink
appears, remove all four ink cartridges
appears, insert the three
appears on the LCD, lower the
DRAINING XX%
, and then press the
, and then press the
appears on the