5. When you see a window asking you to turn on your printer, press the
P Power button. (Make sure the printer is connected; see page 22.)
6. When you see a message that driver installation and printer
configuration were completed successfully, click
Remote Panel begins installing.
7. Double-click
Install Additional Color Profiles
for your printer.
8. Double-click
Install Reference Guide
installed.
9. Do one of the following:
If you are finished installing software, click
•
If you installed the optional EpsonNet print server card,
•
double-click
InstallEpsonNet Config
instructions to install the software. You can use EpsonNet Config to
configure your printer for network use.
10. Close the installer, then remove the CD-ROM. Go to the next section
to update the printer firmware, if necessary.
1-31
Setting Up the Printer
. The EPSON LFP
OK
to install the profiles
and wait while the guide is
Exit.
. Follow the on-screen
|
31