Viewing Status Information - Epson STYLUS 4800 Printer Manual

Note: Some status
information is a
projection based on the
last print made.
Maintaining and Transporting the Printer

Viewing Status Information

To view printer status information instead of printing it, follow these steps:
1. Press the
Menu
2. Press the button until you see
. You see
Menu
3. Do one of the following:
To check the firmware version, press
•
press the button.
To check the number of pages that can be printed with each ink
•
cartridge, press
. When done, press the
This option must be enabled by using the maintenance mode on the
printer's control panel. See page 117 for instructions.
To check the amount of ink left, press
•
then press
Menu
black) is displayed, using the
Continue pressing
When done, press the
To check how much of the maintenance tank has been used, press
•
until you see
the tank is displayed, using the
When done, press the
To check the amount of ink used (in milliliters) and paper used
•
(in square meters), press
press
Menu
option.
You can change the units of measurement from meters to inches
and feet by using the maintenance mode on the printer's control
panel. See page 117 for instructions.
5-103
button. You see
PRINTER SETUP
PRINTER STATUS
.
VERSION
until you see
PRINTABLE PG
button.
. The status of the first cartridge (
E*****F
to see the status of the remaining cartridges.
button.
, then press
MAINT TANK
E*****F
button.
until you see
. Clear this setting with the
.
, then press
again. When done,
Menu
, then press Menu
until you see
INK LEFT
, or matte
MK
symbols described above.
. The status of
Menu
symbols described above.
, then
USAGE COUNT
USE COUNT CLR
| 103
,