108
|
Maintaining and Transporting the Printer
7. Press the
Menu
button again. You see
alignment to start with.
8. Press the
Menu
It takes about 7 minutes to run the automatic uni-directional head
alignment. The printer's white beam sensor reads the alignment pattern
and adjusts the printer automatically. Make sure you don't open the top
cover or turn off the printer during this process.
9. When the uni-directional alignment is finished, press the
you see
BI-D 2-COLOR
the bi-directional black alignment process, which is also completely
automatic and takes about 7 minutes.
10. When the bi-directional black alignment is finished, press the
until you see
BI-D ALL
the alignment process. Again, this process is completely automatic and
takes about 7 minutes.
11. When done, press the
If you want to verify or fine-tune the automatic alignment process, you can
perform a manual head alignment. See your electronic Reference Guide for
instructions.
5-108
button to display
AUTO
(uni-directional). This is the type of
UNI-D
button again to start the alignment process.
. Then press the
Menu
. Then press the
Menu
Pause button to exit the head alignment mode.
, then press the
Menu
button until
button again to start
button
button again to start