Chapter 1:
Setting Up
the Printer
WARNING: The printer
weighs about 88 pounds,
and should be lifted by two
people.
Note: The printer also
includes a black ink
conversion kit (3
cartridges). Save the kit in
case you want to change
your black ink cartridge
later. (See page 113.)
The printer includes a
Photo Black cartridge. If
you prefer to use Matte
Black, the Matte Black
cartridge can be
purchased separately.
See page 110.
This chapter includes the following information:
Unpacking
•
Setting up and plugging in
•
Installing ink
•
Connecting to your system
•
Connecting to the network
•
Installing the software
•
Updating your printer firmware
•
Unpacking
1. Make sure you have all these parts for your Epson Stylus Pro 4800:
Spindle adapters
Power cord
(attached to spindle)
Ink cartridges
(includes Photo Black ink cartridge)
17
IEEE 1394
FireWire Cable
Printer
Roll paper spindle
Paper tray
Black ink conversion cartridges
17