Epson STYLUS 4800 Printer Manual page 134

134 | Solving Problems
Message Light
SERVICE REQ. All lights
flashing
SET INK CRTG —
SET PAPER
LEVER on
TOP COVER —
OPEN
UNABLE TO —
PRINT
WRONG INK B Ink light on
CRTG
WRONG PAPER
SIZE flashing
Explanation
The print head is
locked.
An error has occurred.
Ink cartridge chip error.
Paper light Paper lever was
released during the
printing process or
another operation.
Top cover is open.
You tried to print while
an error condition was
present.
You tried to install the
wrong ink cartridge.
Paper light Loaded paper does not
match the image size.
Response
Pull out the green tab to unlock the print head.
See page 18.
Note the error number, then turn the printer off
and back on. If the message remains, contact
Epson as described on page 10.
Remove and reinstall the ink cartridge. If the
message remains, replace the cartridge.
Pull the lever all the way forward, to the
secured position. Start printing again from the
beginning for best results.
Close the top cover.
Press the
SelecType menu system. If the message
appears again, clear the error before you print.
If you are installing ink cartridges for the first
time, you must install the cartridges that came
with your printer.
If you are replacing ink cartridges, check the
package and product code. You must use the
ink cartridges designed for your printer. Other
cartridges will not work.
Make sure the size you selected in the printer
driver matches the loaded paper size. Load the
correct size paper if necessary.
6-134
Pause button to exit the