Epson STYLUS 4800 Printer Manual page 92

92 | Printing with Epson Drivers for Windows
Note: The Print Quality
settings available depend
on the Media Type you
selected. Choose lower
print quality for faster
printing, or SuperPhoto -
2880dpi for best quality.
Tip: If you turn off color
management, you can
still control the ink
density, as described
on page 93.
4. Choose one of the following
• Draft
• Normal - 360dpi
• Fine - 720dpi
• SuperFine - 1440dpi
• SuperPhoto - 2880dpi
5. Choose any of the following:
• High Speed
• Flip Horizontal
backlight film.
• Finest Detail
line art.
• Edge Smoothing
6. Choose one of the following Color Management settings:
• Color Controls
brightness, contrast, saturation, and CMY inks, or choose from the
three Color Control modes. You can also choose from three Gamma
settings, which control image contrast by modifying the midtones
and midlevel grays.
• PhotoEnhance
common to digital camera images or choose special tone and effect
settings.
• Off (No Color Adjustment)
printer driver. Choose this mode when you use a color managed
workflow in Photoshop or other software.
adjusts colors based on the printer's ICC profile, using the
• ICM
Image Color Matching system and the printer's Epson Standard
profile. In most cases, you will get better results by applying color
management in your application, rather than in the printer driver.
7. If you are using non-Epson media and you need to fine-tune its
performance, click the
4-92
Print Quality
for fast, bidirectional printing at lower quality.
for printing a mirror image of your file. Use with
for sharper edges when printing text, graphics, and
to improve the quality of low-resolution images.
lets you specify individual values for adjusting
allows you to correct noise and other problems
disables color management in the
button.
Paper Config
settings: