Writing Problem; Cannot Write To The Disc; The Product Does Not Functiont; All Lights Are Off - Epson PP-100 User Manual

❏ The printable side of the discs are face up in the stacker.
❏ The stack of discs was fanned before loading.
❏ The stack of discs is not loaded above the red line on the stacker.
❏ The number of discs in the stacker does not exceed the limit specified for that disc.
& See "Mechanical" on page 94.
❏ The product is on a flat, stable surface that extends beyond the base in all directions.
The product will not operate properly if it is tilted.

Writing Problem

Cannot write to the disc

Avoid using the product where dust or smoke is abundant. It may result in write error.
If a disc write error occurs frequently, check the following:
❏ The disc is not damaged.
❏ The disc is high-quality.
❏ The product is used within acceptable environmental conditions.
❏ The product is not subject to vibration or shock.
❏ The fan filter is not clogged with dust.
❏ The printer tray is not dirty.

The Product Does Not Functiont

All lights are off

❏ Press the P power button to make sure the product is on.
❏ Turn off the product, and make sure that the power cord is securely plugged in.
❏ Make sure that your outlet works and is not controlled by a wall switch or timer.
81
Troubleshooting