Taking Out Discs
Follow the steps below to take out the published discs from the stackers.
1. Open the disc cover, and take out the stacker.
2. Take out the published discs from the stacker. The output stacker differs according to
the publishing mode. Refer the following table.
Output stacker
Stacker 2
Stacker 3
Stacker 4
Stacker 2
3. Install the stacker in the product, and then close the disc cover.
Mode
Standard mode
Batch mode
Batch mode
Standard mode
External Output mode
Stacker 3
Number of discs
Up to 50 discs
Up to 50 discs
Up to 5 discs
Stacker 4
Publishing Discs
49