Problems With Printing - Epson PowerRIP Stylus User Manual

Problems with printing

If you cannot get the printer to print, first check that paper is
loaded in the printer. Then check that the printer is plugged
into a working electrical outlet that is not controlled by a switch
or timer. Verify that the interface cable is securely connected to
the printer and computer.
After you have done all this, see the following specific
problems.
Printing has stopped and the Pause light is on.
Printing is temporarily suspended. Press the Pause button to
continue.
Printing has stopped but the Pause light is off.
One or both ink cartridges may be empty or too old. A
cartridge is too old if it has been used longer than six months or
beyond the date on its packaging. First clean the print heads as
described earlier in this chapter. If this does not solve the
problem, replace the ink cartridges.
The peripheral cable between the printer and Macintosh might
not meet the specifications for the printer or computer.
Turn off the printer and perform a self test as described in
Chapter 1. If the self test does not print, the problem is with the
printer. If the self test prints correctly, the problem is probably
with your software.
The No Ink Cartridge light is on, and the printer does not print.
One or both ink cartridges are not installed. Install both ink
cartridges.
4-10
Maintenance and Troubleshooting