High-Speed Mode; Deciding What Printer Settings To Use - Epson PowerRIP Stylus User Manual

High-Speed Mode

When High-Speed Mode is on, the printer prints in
bidirectional mode: it prints a line from right to left and the
next line from left to right. If High-Speed Mode is not on, all
lines are printed in the same direction.
Printing is faster when High-Speed Mode is on. However, the
vertical alignment may not be as precise. For this reason, turn
off High-Speed Mode when you need to increase print quality.

Deciding what printer settings to use

To get the highest-quality printing, use 720-dpi resolution and
make sure MicroWeave is on and High-Speed Mode is off. Be
sure to use EPSON Special coated paper for 720 dpi. If you use
any other paper type, the ink may spread and so reduce the
print quality.
For fast printing, use 360- or 180-dpi resolution (180 dpi is
faster than 360 dpi), turn on High-Speed Mode, and turn off
MicroWeave.
4
Introduction