Plugging In And Turning On The Printer; Installing The Ink Cartridges - Epson PowerRIP Stylus User Manual

Plugging in and turning on the printer

1. Make sure you have removed all protective packing
materials from inside the printer.
2. Plug the power cord into a properly grounded electrical
outlet.
3. Turn on the printer by pressing the Operate button.

Installing the ink cartridges

Caution:
c
The ink cartridges are self-contained units. Under ordinary
use, ink will not leak from a cartridge. If ink does get on your
hands, wash them thoroughly with soap and water. If ink gets
into your eyes, flush them immediately with water.
Note:
Install both ink cartridges. If only one cartridge is installed, the
printer will not work.
Setting Up the Printer
1-5