Calibrating The Printer - Epson PowerRIP Stylus User Manual

If you select the AT-Stylus COLOR icon, a list of printers
appears at the right of the dialog box. Click the name of the
printer you want to use.
4. If you wish, turn on background printing. When
background printing is on, you can print in the background
while using your Macintosh for other tasks. You must turn
on background printing to use the EPSON Monitor Utility
to manage print jobs.
Turning on background printing slows the print speed
and may also slow any software program you use while
printing in the background.
5. Close the Chooser.

Calibrating the printer

Use the BI-D Calibration Utility to adjust your printer so
vertical lines in text and graphics are correctly aligned.
1. Double-click the BI-D Calibration Utility icon.
If you installed the BI-D Calibration Utility, it is located on
your hard drive. If you did not install it, insert the EPSON
Macintosh printer driver diskette into a diskette drive.
2. In the screen that opens, choose the interface type.
Choose Serial if you are using the serial interface. You are
then prompted to specify the printer or modem port.
Choose Network if you are using the optional LocalTalk
interface. (Select Network even if you are using LocalTalk
to connect to a single Macintosh.) You are then prompted
to select the Stylus COLOR printer you want to calibrate.
Setting Up the Printer
1-17