Table of Contents
Advertisement
8. Choose one of the CAD/Line Drawing options as the Select Target setting.
9. Select any other printing settings as necessary and click OK.
10. Start printing your drawing from the CAD software.
Parent topic:
Printing CAD Drawings in HP-GL/2 or HP RTL Mode
You can change settings in your product's control panel to print CAD drawings using HP-GL/2
(compatible with the HP Designjet 750C) or HP RTL mode. This printing method is best for maps and
blueprints, or when lines need to be emphasized.
Note: The product emulates HP-GL/2 or HP RTL commands. Not all HP-GL/2 and HP RTL features are
supported on the product.
1. Press the
2. On the LCD screen, select Settings > General Settings > Printer Settings > Universal Print
Settings.
You see this screen:
3. Make sure the Paper Source setting is set to Roll Paper.
Note: If roll paper is not selected when HP-GL2 or HP RTL print data is sent, an error occurs.
4. Select any other settings as necessary.
Printing CAD Drawings
home button on your product, if necessary.
127
Advertisement
Table of Contents
