Calling Hp Technical Support - HP StorageWorks P9000 User Manual

Error Code
-754
-755
-756
-757
-758
-759
-760
-761
-780
-781

Calling HP Technical Support

If you need to call the HP technical support, make sure to provide as much information about the
problem as possible, including the circumstances surrounding the error or failure and the exact content
of any messages displayed on the S/390 and/or open-system hosts. Collect the following information
before you call for technical support:
Error message
"Edit option file : Sign plus
(Number) error"
"Edit option file : Sign
minus (Number) error"
"Edit option file : Zero
suppress
(TRAN_NON_SUPPRESS)
error"
"Field define file :
Input/Output field size
error"
"Number exchange : Sign
position (Number) error
with input data"
"Number exchange :
Decimal point (Number)
error with input data"
"Number exchange : Input
data (Number) error"
"Edit option file : All space
(Number) error"
License of Code Converter:
It does not have the
license."
License of Code Converter:
It expired."
P9000 Data Exchange Code Converter User Guide
Meaning
Numeric conversion in the
Edit Option file contains an
incorrect plus sign.
Numeric conversion in the
Edit Option file contains an
incorrect minus sign.
No zero suppression" is
specified for numeric
conversion in the Edit
Option file.
Cannot perform numeric
conversion because
input/output field length in
the Field Definition file is
too short.
Cannot perform numeric
conversion because sign
position in the Edit Option
file does not correspond to
the input data.
Cannot perform numeric
conversion because the
number of decimal digits in
the Edit Option file does not
correspond to the input
data.
Cannot perform numeric
conversion due to wrong
input data.
Numeric conversion in the
Edit Option file contains an
incorrect all-space field.
Do not have the license of
Code Converter.
Code Converter license
expired.
Action
Check the Edit Option file.
Check the Edit Option file.
When placing a sign
before effective digits
(TRAN_SIGN_V), No zero
suppression" cannot be
specified.
Check the Field Definition
file.
Check the input data and
the Edit Option file.
Check the input data and
the Edit Option file.
Check the input data.
Check the Edit Option file.
Input the Code Converter
license key.
Input the Code Converter
license key again.
93