Customizing The Code Conversion Table (Ccnv): Error Messages - HP StorageWorks P9000 User Manual

message is received. The following table contains the ccnv error messages and recommended actions
to take.
Table 20 Customizing the Code Conversion Table (ccnv): Error Messages
Error Code Error Message and Description
Utility terminated. Termination code =
termination_code.
CCNV has terminated. The termination
code is shown in decimal number. The
termination codes indicate the following:
00: Successfully terminated.
08: Error found in definition statement. The
CCNV101-I
statement was ignored to continue
operation.
12: Definition statement could not be
executed due to error. Operation aborted.
Messages with a termination code other
than 00 will be preceded by an error
message indicating the error detail.
Code conversion table successfully
generated.
CCNV102-I
A code conversion table was created with
the specified name.
Cannot generate code conversion table
due to error.
CCNV103-I
Failed to create code conversion table due
to reasons indicated by the preceding error
message.
Definition statement not specified.
CCNV104-I
Cannot execute utility because there is no
definition statement specified.
NAME statement is wrong value or not
CCNV105-I
specified.
TYPE statement is wrong value or not
CCNV106-I
specified.
78 Troubleshooting
Action(s)
System action: Terminates operation.
System action: Operation continues
(Termination code 00).
System action: Proceeds to the next
definition statement (Termination code 12).
User action: Re-execute after reviewing the
contents of the preceding message and
making the necessary corrections.
System action: Terminates operation
(Termination code 12).
User action: Specify the definition
statements and re-execute.
System action: Terminates operation
(Termination code 12).
User action: Re-execute after checking the
following:
• The table name is specified in 255 or
fewer alphanumeric characters begin-
ning with an alphabetic character.
• NAME is specified.
System action: Terminates operation
(Termination code 12).
User action: Re-execute after checking the
following:
• HOSTtoBIG5 or BIG5toHOST is spe-
cified for TYPE.
• TYPE is specified.