HP StorageWorks P9000 User Manual page 90

Error Code Error message
"Code conversion :
-684 Unmatched exchange kind
and exchange table error"
Code conversion : Broken
-685
exchange table error"
"Code conversion :
-686
Memory allocate error"
"Code conversion : Broken
-687
environment area error"
"Code conversion :
-688
Exchange length error"
"Code conversion :
-689 Exchange code read/set
non area error"
"Code conversion : Other
-690
error"
"Conflicting with input
-691
data"
"Edit option file : Wrong
-693 type of code conversion in
the 1 byte code conversion"
"Edit option file : Wrong
replacement code for
-694 undefined 1 byte character
in the 1 byte code
conversion"
90 Troubleshooting
Meaning
Type of conversion does not
match the code conversion
table in double-byte or
single-byte code
conversion.
Conversion table area is
broken in double-byte or
single-byte code
conversion.
Memory allocation failed
during double-byte or
single-byte code
conversion.
Environment area is broken
in double-byte or single-byte
code conversion.
Conversion length error
found during double-byte or
single-byte code
conversion. Field size to
convert was 0.
Area to refer/set code to
convert was not specified
in double-byte or single-byte
code conversion.
Unexpected error occurred
during double-byte or
single-byte code
conversion.
Could not perform
conversion because
conversion mode conflicts
with input data.
Single-byte code conversion
in the Edit Option file
contains an incorrect type
of code conversion.
Single-byte code conversion
in the Edit Option file
contains an incorrect
replacement code for
undefined single-byte
characters.
Action
Check the code conversion
table.
Use ccnv to display and
check the contents of the
conversion table.
Select Error from the Help
menu to view the system
error code, and then check
the operating system
document for error details.
Confirm the FCU
configuration is correct.
Check the Field Definition
file.
Confirm the FCU
configuration is correct.
Check the Field Definition
file and Edit Option file.
Check the input data and
the Edit Option file.
Check the Edit Option file.
Check the Edit Option file.