Accessing Telnet; Telnet Menu Basics - HP NetStorage 6000 Management Manual

Managing the HP NetStorage 6000 Using Telnet

Accessing Telnet

To access Telnet, you need an ANSI-compatible terminal emulator.
1. From the Start menu displayed on your desktop taskbar, select Run.
2. In the Run window, use the drop-down arrow to select Telnet.
3. From the Connect menu, select Remote System. The following appears:
4. In Host Name, enter the server name. For example, Server 1.
5. In Port, select telnet.
6. Click Connect. If the administration access is password protected, you are asked for the password.
7. Once connected, the telnet screen displays the following prompt:
8. Press Enter (default).

Telnet Menu Basics

This section describes each Telnet screen used for setting up and maintaining your system. Here are a few
basic guidelines for using Telnet:
• To select a menu, press the number or letter associated with the item.
For example, press 1 to select 1. Activity Monitor screen.
• The box at the bottom of every screen displays the tasks you can perform and which letter you need to
select to execute the action.
• Press Enter to view the default menu. If admin access is password protected, you will be prompted for the
password before the menu.
• Use the space bar to scroll through a list.
• A box containing menu options displays on the bottom of each screen.
2