HP NetStorage 6000 Management Manual page 46

Managing the HP NetStorage 6000 Using Telnet
• the network parameters
• the timezone parameters
• the modem and printer configuration
When used with no argument, the information is displayed directly to the user. When given a
file argument, the information is stored into the named file. When given a printer argument,
the information is queued for the named printer. The presence of a / character indicates that the
argument is a file name rather than a printer name.
Usage:
Example:
revoke
The
be used to clean up mounts that are no longer in use when the client can not do so.
Usage:
Example:
savevars
The
Usage:
scanvars
The
configuration information. The configuration information includes:
• the server network address and other network parameters (inet.*)
• printers
• modems
You would usually use
the set command, and want the changes to take effect. Normally, you would use the
command or the menus to make configuration changes, and the variables are scanned automat-
ically.
Example:
set The
essary. The
44
report [ file| printer]
report
report ps1
report $bootdir/report.out
revoke command deletes the remote NFS mount information for each host given. It can
revoke hostname/addr ...
revoke aclient
revoke 192.3.4.5
command save all variable values to the values files.
savevars
savevars
scanvars command initiates a procedure that scans the system variables to determine
scanvars
set com2.ptype printer
set com2.setting 4800n81n
scanvars
unset com2.*
scanvars
set inet.ipaddr 192.3.4.100
scanvars
command changes the value associated with a variable. The variable is created if nec-
set
show command is used to examine the values of variables.
after you have changed several configuration variables with
periph