Source Menu Descriptions And Functions - NEC NP4100WJ User Manual

Source Menu Descriptions and Functions

The Source menu displays all supported image sources.
Select the required source from the menu using ▲ or ▼ and press Enter to confirm.
I
TEM
Computer 1
Computer 2
Computer 3
Component
Video
S-Video
Note:
If an XGA signal is not correctly recognized on NP4100W, set "WXGA Mode" to
Off (see page 99).
To check if the signal is recognized, go to "Source" under "Information" menu (see
page 102).
Select the source connected to the Computer 1 input
(see Connecting Your PC or Macintosh Computer on page 31).
Select the source connected to the Computer 2 input
(see Connecting Your PC or Macintosh Computer on page 31).
Select the source connected to the Computer 3 input
(see Connecting Your PC or Macintosh Computer on page 31).
Select the source connected to the Component input
(see Connecting Your DVD Player with Component Output on
page 34).
Select the source connected to the Video input
(see Connecting Your VCR on page 35).
Select the source connected to the S-Video input
(see Connecting Your VCR on page 35).
5. Using On-Screen Display
D
ESCRIPTION
67