Changing The Default Settings; Selecting An Instruction Sheet Language; Selecting Items And Changing Settings - Epson LQ-2170 User Manual

Changing the Default Settings

The default settings control many basic functions of the printer.
While you can control many of these functions through your
software or printer driver, you may sometimes need to change a
default setting from the printer's control panel through the Default
Setting mode.
To enter Default Setting mode, hold down the Pitch button while
turning on the printer. The printer prints an instruction sheet.
Follow the instructions on this sheet, and in this section, to change
settings using the Default Setting mode.

Selecting an instruction sheet language

Follow these steps to select the language in which you want to
print the rest of the Default Setting mode instructions:
1. Press the Pitch button until the Pitch lights indicate the
language you want to select.
2. Press the Tear Off/Bin button to save your selection.
3. Press the Font button to print out the instruction.

Selecting items and changing settings

Follow the steps below to select items and change their settings.
The available items and settings are listed on the instruction sheet
and in the table on the next page.
1. Press the Pitch button until the Pitch lights indicate the item
you want to change.
2. Press the Tear Off/Bin button until the setting you want to use
for that item is indicated by the Tear Off/Bin and Pause
lights.
Using the Printer
3-7