Advertisement
LK/ACT
Dyna-Switch/16
FD/COL
16 Port 10
/
100Base-TX Switch
LK/ACT
FD/COL
POWER
Power Indicator
Figure 4. Front panel view of LED indicators
Status LEDs
LED
Status
Color
Power
On
Green
On
Green
LINK/ACT
Blinks
Off
On
Orange
FDX/COL
Blinks
Off
LINK/ACT and FDX/COL
Indicators
Description
The switch is supplied with
suitable power.
The port is connecting with
the device.
The port is receiving or
transmitting data.
The port is not linked
successfully with the device.
The port is operating in Full
Duplex mode.
A packet collision occurred at
this port.
No device attached or the port is
operating in Half Duplex mode.
4
Network Application
This section provides a few samples of network topology in which the
Switches are used. The Dyna-Switch/16 and 24 are designed to be
used as segment switches. With their large address tables (8K MAC
address) and high performance, they are ideal for interconnecting
networking segments.
You can use the Dyna-Switch/16 and 24 to connect PCs, workstations,
and servers to each other by connecting these devices directly to a
Switch. The switch automatically learns node addresses, which are
subsequently used to filter and forward all traffic based on the
destination address.
Small Workgroup
The Dyna-Switch/16 and 24 can be used as standalone switches
interconnecting personal computers, servers, and print servers forming a
small workgroup.
Figure 5. Small Workgroup Application
Server
Workstations
5
Printers
Advertisement
