Station Connection; Network Application - UNICOM FEP-31024T-3 User Manual

Station Connection

Connect each station to the switch by twisted-pair cable. Plug one
RJ-45 connector into a RJ-45 port of the switch, and plug the other
RJ-45 connector into the station's network adapter. Power on the
switch and then system is ready.
Switches Connection
In making a switch interconnection, you could use any port to
connect another switch with straight or crossover cable. As all the
ports support auto MDI / MDI-X function, using a straight cable to
make a switch-to-switch connection is allowed.
For cable selection, see the following table：
Network Speed Cable Type
10Mbps Cat. 3, 4, 5 UTP/STP
100Mbps Cat. 5 UTP/STP

Network Application

Max. Length
100 meters
100 meters
5