Necessary Cables: UTP (Unshielded Twisted Pair) Cable Package Contents LED Indicators: Per Device: Power Per Port: LINK/ACT, FDX/COL Package includes the following: Dyna-Switch/16 or 24 Performance Specifications Rack-mounting brackets Transmission Method: Store and forward AC power cord MAC address table: 8K-entry MAC address table Four (4) adhesive-backed rubber feet Maximum Forwarding Rate: 14,880 pps /10Base-T...
Introduction Troubleshooting The Switch can be easily monitored through panel indicators to assist in The Dyna-Switch/16 and Dyna-Switch/24 (Auto MDI/MDIX) are Fast identifying problems. This section describes common problems you may Ethernet switches that provide wire-speed, a Fast Ethernet switching encounter and possible solutions.
Segment Bridge Hardware Description For enterprise networks where large data broadcasts are constantly The Front Panel processed, these switches are an ideal solution for department users to The Front Panels of the Dyna-Switch/16 and 24 consist of connect to the corporate backbone. 10/100Base-TX RJ-45 ports and LED Indicators.
Network Application LK/ACT Dyna-Switch/16 This section provides a few samples of network topology in which the FD/COL 16 Port 10 100Base-TX Switch LK/ACT Switches are used. The Dyna-Switch/16 and 24 are designed to be FD/COL used as segment switches. With their large address tables (8K MAC POWER address) and high performance, they are ideal for interconnecting LINK/ACT and FDX/COL...