TYAN Toledo q35T User Manual page 50

3.4.2 Advanced Processor Options
This section allows you to fine-tune the processor options.
Main
Hyperthreading:
Core Multi-Processing
Single Logical Proc. Mode
Thermal Management 2
Set Max Ext CPUID = 3
C1 Enhanced Mode
PECI Interface
Intel® Virtualization Technology
No Execute Mode Mem Protection
Frequency Ratio
Frequency Hi Ratio
Processor Power Management
F1 Help
Esc Exit
← →
Hyperthreading
Enable this only if you have an Intel Hyper Threading processor.
Enabling Hyperthreading activates additional CPU threads. These threads may
appear as additional processors but will share some resources with the other
threads within the physical package.
Options: Enabled / Disabled
Core Multi-processing
Determines whether the second core is enabled.
[Disabled]: the second core is disabled
[Enabled]: the second core is enabled
Options: Disabled / Enabled
Single Logical Proc. Mode
Multiple Core Processor. Only single thread and core is enabled.
Options: Disabled / Enabled
Thermal Management 2
Select between TM1 and TM2.
Options: Disabled / Enabled
Set Max Ext CPUID = 3
Sets Max CPUID extended function value to 3.
Options: Disabled / Enabled
PhoenixBIOS Setup Utility
Advanced
Advanced Processor Options
Select Item
↑↓
Select Menu
Security Power
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Default]
[X 12]
[GV1/GV3 Only]
-/+ Change Values
Enter Select
Sub-Menu
50
Boot Exit
Item Specific Help
Enabling
Hyperthreading
activates additional
CPU threads. These
threads may appear as
additional processors
but will share some
resources with the other
threads within the
physical package.
F9 Setup Defaults
F10 Previous Values