TYAN Toledo q35T User Manual page 19

CMOS (J14): Clear CMOS Jumper
1
3
Normal
(Default)
1
3
Clear
Use this jumper when you have forgotten your system/setup
password or need to clear the system BIOS settings.
How to clear the CMOS data:
- Power off system and disconnect the power supply
from the AC source
- Use jumper cap to close Pin 2 and 3 for several
seconds to Clear CMOS
- Replace jumper cap to close Pin 1 and 2 Reconnect
the power supply to the AC source
-
Power on system
19