Switch Configuration; User Targets - Tripp Lite NetCommander B072-016-1-IP Owner's Manual

14. Switch Configuration

Server Name
The Switch Configuration page allows users to give each port a unique
name, making it easier to differentiate between them. By default, ports
are named as Server 1, Server 2, Server 3, etc. To edit port names,
simply highlight the name of the desired port on the Switch Configuration
page and type in whatever name you want. To save the new port name,
click the Save button.

15. User Targets

The User Targets page allows administrators to choose which ports
an account has access to. Although this feature allows administrators
to deny other administrators access to ports on the KVM, it allows
administrators to set their own port access rights, which gives them the
ability to undo any changes to their port access settings made by another
administrator. To assign port access rights to an account, follow the steps
below. Note: If an account is given access to a port that has a second
level KVM cascaded from it, they will have access to each port on that
KVM. Security settings for ports on a second level KVM must be set within
its own OSD.
1. Select the desired account from the drop-down list at the top of the
page. The ports that the selected account currently has access to will
be checked.
2. Check the ports you want the account to have access to, or uncheck
ports that you don't want the account to access. You can click the
Select All Targets button to check all of the ports at once.
3. Click the Save button to save the port access rights for the selected
account.
201204111 93-2769.indd 10
10
8/2/2012 10:16:00 AM