Level 2 Options
RX-BUFFER SIZE
The receive buffer option allows you to change the size of the
printer's input buffer. A large receive buffer size allows you to
quickly transfer the contents of a file from the computer's memory
to the printer's memory. The printer then prints the information
from its own memory and frees up the computer for other tasks.
If you set the buffer size too high, however, you may get an error
message telling you to add memory. The factory default setting is
5K.
When you press
Press
or
change the buffer size. Then press
3-30
SelecType
the display reads as follows.
Menu/submenu
to choose the channel for which you want to
Menu/submenu
Available options
S,P,O
Available options
See the table on the
next page