Level 2 Options
This section lists all the menus and options available when you use
SelecType Level 2. When you enter SelecType Level 2, you see one
of these options:
TEST PRINT
MODE ASSIGN
I/F CONFIG
RX-BUFFER SIZE
CH
TIMEOUT
CH TIMEOUT
AUTO CONT
BEEPER
P-CONFIG SAVE
FACTORY RESET
VERSION
PAGE COUNTER
RITech
STANDBY
TEST PRINT
You can use this option to print two different test patterns to
check whether your printer is working correctly. After TEST
PRINT appears, press
Press
to print pattern 1 (vertical lines). To print pattern 2
(horizontal lines), press
details on running a test print.
3-22
SelecType
once to see the following display:
Menu/submenu
then press
Available options
1 to 2
. See Chapter 2 for