Default Settings - Epson EPL-8000 User Manual

Default Settings

When your printer is initialized, the settings for the HP emulation
mode are reset to the values
Item
Paper input
Paper size
Orientation
Copy count
Page length
VMI
HMI
Top margin
Text lines
Text length
Portrait
Left margin
Right margin
Line
termination
Appendix B
B-30
Factory Reset
Standard paper cassette
Letter (US) or (A4) other
Portrait
1
64 (US) or 70 (other) lines
8/48 inch (6 lines per inch)
12/120 Inch (IO cpi)
l/2 inch (150 dots)
60 (US) or 64 (other) lines
60 (US) or 64 (other) lines
logical page left margln
logical page right margin
CR=CR, LF=LF, FF=FF
in the table below.
shown
SelecType setting
SelecType setting
SelecType setting
SelecType settrng
Depends on the paper size
and orientation settings
Page length minus 1 dtvided
by text lengih. Values are
fixed and depend on the
SelecType paper size setting.
The page length and text
length are measured in
Inches.
HMI of the selected font
1/2 Inch (150 dots) when
SelecType OFFSET is 0
SelecType setting
SelecType setting
logical page left margin
logical page right margin
CR=CR, LF=LF, FF=FF
Reset