Epson EPL-8000 User Manual page 77

Enter SelecType mode
To enter SelecType, just press the SelecType button. SelecType has
two levels; the level you enter depends on how long you press the
button. Press and release the SelecType button to enter Level 1, or
press and hold the SelecType button to enter Level 2.
When you enter Level 1, the display shows SelecType LEVEL1
briefly. Then one of the Level 1 main menu options appears. When
you enter Level
Then, one of the Level 2 main menu options appears.
The following discussion uses the INPUT option in SelecType
Level 1 as an example.
Select a channel
If you are using INDIVIDUAL mode, SelecType Level 1 begins
with the display shown below.
The display shows the available channels only. See Chapter
more information on sharing the printer.
If you are using AUTOSENSE mode, remember the channel (S, P,
or O) displayed before you enter SelecType. All Level 1 settings
are stored in that channel. If you want to save the settings
permanently, store them in a macro and choose that macro as the
poweron macro. See pages
The printer stores the settings for each channel separately. The
settings you choose in one channel do not affect the settings in the
other.
the display shows SelecType LEVEL2 briefly.
2,
3-20
and
3-21.
Using SelecType
for
2
SelecType 3-9