Epson EPL-7000 User Manual page 95

SelecType Options
CAUTION:
installed optional memory as described in Appendix A.
The printer has
0.6
before adding memory, you could damage your printer.
This option specifies the proportion of memory for channel S and
Channel P. The numbers at the right indicate the current available
memory. If you want to share the printer, press
S 0:10P
S 1: 9P
S10: OP
The proportion of memory for each channel can be set from
to increments of 1. The factory settings is P10: OS. Press
0:10 by
or
CAUTION:
channel requires at least
always needs some portion of RAM for general
operation. If you use one memory chip set to increase the
printer's memory to 1.0 MB, your best setting would be
4:6 or 6:4.
SelecType
3-32
Do not set this option unless you have
0.5
MB RAM to share the printer. If you set this option
to change the setting.
When you share the printer, each printer
MB RAM, however; you must have
Kbytes of RAM, the printer
0.3
to display:
10:0