Epson EPL-7000 User Manual page 161

Status and Error Messages
ILLEGAL CARD
[E]
A card or cartridge in a particular slot cannot be read. The
letter on the right side of the display indicates the slot
containing the card or cartridge that cannot be read. To
correct this error, take the printer off line and then press
CONTINUE.
is off line and remove the card or cartridge. If the red
CONTINUE
INITIALIZE
[S]
The printer is being initialized (reset) to the factory settings.
INSUFF. MEMORY
[E]
The printer has insufficient memory available for the task you
have given it. To correct the error, press
message remains, press
described in Chapter 2.
This error can also be cleared by turning the printer off and
back on again. However, it may be necessary to simplify the
page you are trying to print or add more memory to the
printer. See Appendix A for information on memory options.
[E] PAGE BUFFER FULL
Text or graphics data has filled the printer's buffer and an
incomplete page is ejected. Press
You may need to add more memory to the printer. See
Appendix A for information on memory options.
PAPER FEEDING
[S]
The printer is feeding paper.
PAPER JAM
[E]
Paper is not being fed into the printer or paper is jammed
inside the paper path. You need to open the printer and clear
the jammed paper as described later in this chapter.
7-4 Troubleshooting
If the error message remains, make sure the printer
light still flashes, press
RESET
CONTINUE.
CONTINUE.
or perform INITIALIZE as
to clear the error.
CONTINUE
If the