Epson EPL-7000 User Manual page 180

Problem
ONLINE
The light is
off-
The printer stops
printing and the
display reads
PAPER OUT
or
TONER OUT.
The printout is not
what you expect.
The font you
selected with
software commands
cannot be printed.
Characters not
belonging to the
selected symbol set
are being printed.
Solution
The printer is off line. Press the
button once to set the printer on line (the
light comes on).
ON LINE
Replace the component specified. See
Chapter 4 for paper loading instructions.
See Chapter 6 for imaging cartridge
replacement instructions. After replacing
the component, close the printer.
The correct orientation (portrait or
landscape) may not be selected. Make sure
that the orientation (portrait or landscape)
matches the selected font. The correct font
is not selected if
the selected orientation.
The font you selected with your software
may not be available. Be sure you
installed the correct font card or cartridge.
The expected symbol set may
available in the printer. Be sure you have
installed the correct font card or cartridge.
The correct symbol set may not be
selected. Specify the desired symbol set
(containing international characters or
symbols) with your software or with
SelecType. Available symbol sets in
SelecType vary depending on
printer mode. See Chapter 3 or Appendix
C for more information.
Printing Problems
font does not contain
the
not
the
Troubleshooting
ON LINE
have
be
selected
7-23